Ewes rejecting lambs?

Ewe placed in an orphan head gate. Ewes that reject their lambs may be placed in the head gate to re-bond them with their lambs. Can also be used to graft lambs onto ewes. 

It's not uncommon to have a ewe reject her lambs. There are a variety or reasons that this may happen.

• First time mothers may be afraid of what just came out of them. 
• If group penned close together, some ewes become nervous. This is an opportune time for granny ewes to come and steal lambs. 
• Sometimes a ewe having multiples will lose track of the first lamb (while focusing on birthing the second or third, etc). She then cleans off the later born lamb(s) meanwhile the 1st has wandered off. 
• Sharp teeth. This causes discomfort to the ewe during feeding so they prevent the lamb from feeding in order to avoid the pain. This is fixed with a quick pass with a tooth file. Check the lambs teeth before doing so to ensure this is the cause of the neglect. 

For most cases (other than sharp teeth), rejection can be remedied by placing the ewe in an orphan head gate. 

Lamb with sharp teeth. Filing the teeth prevent the lamb from damaging the dam's udder. 

Lambing Jugs

With lambing season already here for many, a few of the questions we've answered have pertained to lambing jugs. Our lambing system tends to shift from year to year but one of the constants is our use of lambing jugs for indoor lambing.

Q. How big should they be for different breeds? 

A. Usually the following:

• Small breeds—4'x4'
• Medium breeds—5'x5'
• Large breeds—5'x6' or 6'x6' 

Q. How tall should they be?

A. Use your own judgement. Ewes that are flighty or are jumpers, taller panels are recommended. For calmer ewes, shorter sides are acceptable. 

Q. Should they be open or solid?

A. Solid sides have merit in older drafty barns—they block drafts. 

For barns that are not as drafty or if lambing in warmer weather, open sides allow the ewe to see other sheep (in our experience, this helps to calm them). 

Q. How long should the ewes stay in them?

A. Standard for most flocks is 1-3 days. 

• Big healthy single lambs—1 day in the jug 
• Twins—2 days
• Triplets—2-3 days

Q. What is the best bedding to use?

A. A variety of bedding types can be used. We have more or less used them all. 

• Straw is probably the best/easiest to get (Around $3.25-$5 bale). 
• Wood shavings are soft and work well but cost a little more ($6-$10 per bale locally).
• Corn stalks, though rough, are cheap and plentiful in our area. 
• Corn cobs work well if available. 

Q. What is the best way to water ewes in the jug?

A. We have a few different systems in place for watering our ewes. 

• The first is a PVC pipe that runs the length of the barn. Holes are cut into the pipe every 4'-5' to allow ewes access to the water. Water constantly flows through the pipe which keeps it from freezing. 
• For pens not next to the water pipe we use individual buckets. 

1. Buckets are filled via a hose. The shepherd walks along the jugs and tops off the buckets. 
2. A large stock tank is filled and buckets are taken out of the pens, filled by dipping into the tank and returned to the jug. (In talks for being put into practice this year, not official yet.)

Q. How do we feed them in the jug?

A. Welded wire bale feeders, square buckets, BYO feeders and even tile drainage tube have been used in recent years.