Showing posts with label hay. Show all posts
Showing posts with label hay. Show all posts

Thursday, January 24, 2013

Lambing Season 2013

Carl dressed to the 9's (degrees that is) and finishing morning chores in the lambing barn.  
The weather of late has been hovering around a balmy 0°F in the morning to a sweltering 15°F in the afternoon. And lambing season is starting for us (funny how cold weather and lambing seem to coincide).

This year our experiment is using a former warehouse as a lambing barn. This new "barn" offers protection from the elements as well as the option of heat (a real treat). There are some kinks that need to be worked out: feeding, watering and ventilation.

For feeding, the farm guys have been busy building single-sided feeders (using our plans and panels of course). They're arranged to form an alleyway, which allows someone to walk down the center and drop feed to the ewes w/o the need to get into the pen (which is nice since many are carrying twins or triplets.

A bucket placed in a Premier single-sided feeder. The clip was replaced with a Premier bucket holder for added stability. 
Our normal lambing barn (which will still be used this year) has a PVC pipe that carries water the length of the lambing barn. The pipe has cut-outs (so the animals can drink) and flows continuously (so risk of freezing is reduced). A pipe will be installed in the "new" barn. Until then, ewes will be watered via buckets. Fortunately, there is a water hydrant and hose in the building so the guys won't have to haul individual buckets. The farm guys are experimenting with placing a water bucket (held in place with clips) in the feeder and at an angle. They're also trying different sizes and shapes (square vs round) to determine the optimal bucket for this setup.

There are some ventilation issues to work out—the building was not originally designed as a barn. Keeping livestock in the building will bring in considerable moisture. We'll have to be vigilant about clean bedding and getting clean air into the barn. We're planning on installing a vent pipe, it's just a matter of what size and where.



Wednesday, June 20, 2012

Making Small Squares




Last week we made small square bales from a clover field on our home farm. The bales will be used this winter to feed ewes in our lambing jugs. Their size makes them easy to handle, a bale fits well in our drive-by/walk thru feeder or a flake in one of our single or double sided hay feeders. 

Danny and Adrian were on the rack while Carl drove the tractor. When the rack was full it was hauled to the hay barn. When the rack was unhooked, Carl and Danny returned to the field with an empty rack and back to baling.

Adrian went to get the tractor with the bucket to push the rack into the barn. To be productive while waiting for Adrian, I tried pulling the rack into the barn by hand. It was 1/3 of the way in when Adrian arrived to push. As it turns out, it's easier to use the tractor to push the wagon than it is to pull it by hand! We brought the wagon into the barn front end first because it allows us to unload directly into the hay mound (instead of working around the gallous on the back).


While unloading, Adrian placed bales on either side of the tongue and onto the tongue. This formed a ramp/bridge. Adrian would drop bales onto the ramp and they rolled to where I was stacking. When the rack was emptied we would haul it back to the field and trade for the rack Danny and Carl just filled.

When we finished, the barn had an additional 4 racks of hay stuffed inside and we were ready for an iced tea!